“Self-Aligning Ball Bearing – 1220 K” has been added to your cart. View cart
Showing 253–280 of 424 results
Needle Roller and Thrust Ball Bearing - NKX 35 Z
The SKF NKX 35 Z is a compact combined needle roller and thrust ball bearing designed to handle radial loads and axial loads in one direction. With high load capacity, grease retention, and space-saving design, it delivers reliability and speed in demanding applications.
Needle Roller Bearing - NK 16/16
The SKF NK 16/16 is a compact single row needle roller bearing without an inner ring, offering high radial load capacity, rigidity, and low cross-sectional height. Designed with flanges and relubrication features, it is ideal for space-saving and durable applications.
Needle Roller Bearing – HK 1210 E
The SKF HK 1210 E is a compact drawn cup needle roller bearing with open ends, offering high radial load capacity and stiffness. Designed for applications where space is limited, it ensures efficient power transmission and long service life without requiring an inner ring.
Needle Roller Bearing – HK 2520
The SKF HK 2520 is a drawn cup needle roller bearing with open ends, offering a compact and economical solution for space-constrained applications. With high radial load capacity, stiffness, and minimal cross-sectional height, it is ideal where the housing bore cannot serve as a raceway.
Needle Roller Bearing – NK 30/30 TN
The SKF NK 30/30 TN is a single row needle roller bearing with machined rings, integral flanges, and without an inner ring. It is designed for compact bearing arrangements, providing high radial load capacity, stiffness, and excellent performance where hardened raceways can be applied on the shaft.
Oval Flanged Ball Bearing Unit – FYTB 20 TF
Oval flanged ball bearing unit with set screw locking and extended inner ring. Shaft diameter of 20 mm, cast iron housing with two bolt holes for stable mounting. Designed for durability, contamination resistance, and reliable operation at high speeds.
Oval Flanged Ball Bearing Unit with Set Screw Locking – FYTB 30 TF
Oval flanged ball bearing unit with set screw locking and extended inner ring. Shaft diameter of 30 mm, cast iron housing with two bolt holes for stable mounting. Built for durability, load capacity, and high-speed operation in industrial environments.
Oval Flanged Housing for Insert Bearings – FYTBK 504
Oval flanged housing made from lightweight, chemical-resistant composite material. Designed for insert bearings with a spherical seating diameter of 47 mm, featuring a 2-bolt mounting system. Provides strength, durability, and long-term reliability in harsh environments.
Pillow Block Ball Bearing Unit – SY 30 TF
The SY 30 TF pillow block ball bearing unit features an extended inner ring with set screw locking, mounted in a cast iron housing. Built to ISO standards, it is a strong, cost-effective, ready-to-mount solution that comes pre-lubricated and sealed for reliable performance.
Pillow Block Ball Bearing Unit – SY 55 TF
The SY 55 TF pillow block ball bearing unit features an extended inner ring with set screw locking, mounted in a cast iron housing. Designed to ISO standards, it is a strong, cost-effective, ready-to-mount solution that comes pre-lubricated and sealed for reliable performance.
Pillow Block Bearing Unit - M-UCP209D1
NTN M-UCP209D1 Pillow Block Bearing Unit – Heavy-duty cast iron housing with 45mm bore and set screw locking for secure, high-speed performance in industrial machinery and conveyor systems.
Pillow Block Pressed Steel Housing - P 47
SKF P 47 Pillow Block Housing – Lightweight pressed steel housing with zinc coating for corrosion resistance. Cost-effective, easy to install, and ideal for light-load applications.
Portable Induction Heater – TWIM 15/230V
The SKF TWIM 15/230V is a portable induction heater designed for safe and efficient hot mounting of bearings and other metallic components. Compact, lightweight, and robust, it supports workpieces up to 20 kg with automatic temperature control and adjustable power settings for precise heating.
Radial Insert Ball Bearing- GRAE40-NPP-B
GRAE40NPPB 40mm INA bearing insert with spherical outer ring, sealed on both sides, grease-lubricated, and designed for maintenance-free operation.
Radial Shaft Seal – 11299
The SKF 11299 CRW1 radial shaft seal features a metal case, SKF WAVE lip in nitrile rubber, and a garter spring for optimized oil and grease sealing. Its high pumping rate, reduced friction, and Bore Tite coating deliver excellent sealing efficiency and extended service life.
Radial Shaft Seal – 20X37X7 HMS5 RG
The SKF 20X37X7 HMS5 RG radial shaft seal features a rubber outside diameter with a nitrile rubber sealing lip and garter spring, ensuring reliable oil and grease sealing. It supports high speeds, accommodates misalignment, and provides efficient sealing performance under varying conditions.
Radial Shaft Seal – 30X40X7 HMS5 RG
The 30X40X7 HMS5 RG radial shaft seal is designed with a rubber outside diameter and a single sealing lip, making it ideal for oil or grease applications. With a garter spring ensuring the correct radial load, this seal provides reliable performance, high pumping efficiency, and the ability to accommodate misalignment.
Radial Shaft Seal – 60X80X10 HMS5 RG
The SKF 60X80X10 HMS5 RG radial shaft seal features a rubber outside diameter and a single nitrile rubber sealing lip with a garter spring. Designed for oil and grease applications, it delivers reliable sealing, accommodates misalignment, and ensures durability under demanding operating conditions.
Radial Shaft Seal – 80X110X12 HMS5 RG
The SKF 80X110X12 HMS5 RG radial shaft seal features a rubber outside diameter with a single nitrile rubber sealing lip supported by a garter spring. Designed for oil and grease applications, it ensures reliable sealing, accommodates misalignment, and withstands temperatures from –40 °C to 100 °C.
Radial Shaft Seal – 80X110X12 HMS5 RG
The SKF 80X110X12 HMS5 RG radial shaft seal is built with a rubber outside diameter and a nitrile rubber sealing lip supported by a garter spring. It provides effective sealing for oil and grease, accommodates shaft misalignment, and delivers reliable operation under demanding speeds and temperatures.
Radial Shaft Seal – 85X110X12 HMS5 RG
The SKF 85X110X12 HMS5 RG radial shaft seal features a rubber outside diameter and a nitrile rubber sealing lip with garter spring. Designed for oil and grease retention, it supports high speeds, accommodates misalignment, and ensures reliable performance across various applications.
Radial Shaft Seal – 90X110X10 HMS5 RG
The SKF 90X110X10 HMS5 RG radial shaft seal is designed with a rubber outside diameter and a single nitrile rubber sealing lip supported by a garter spring. Suitable for oil and grease applications, it provides reliable sealing performance, accommodates misalignment, and withstands temperatures from –40 °C to 100 °C.
Radial Shaft Seal – 90X110X12 HMS5 RG
The SKF 90X110X12 HMS5 RG radial shaft seal is designed with a rubber outside diameter and a nitrile rubber sealing lip supported by a garter spring. It provides secure oil and grease sealing, accommodates misalignment, and ensures reliable operation at high speeds and varying conditions.
Radial Spherical Plain Bearing – GE 17 ES
The SKF GE 17 ES is a radial spherical plain bearing designed for applications requiring high load capacity and misalignment tolerance. Featuring a steel/steel sliding contact surface, it is suitable for heavy static, alternating, or impact loads. The bearing requires relubrication for reliable performance.
Refill Cartridge Grease Set – LGWA 2/SD250
The SKF LGWA 2/SD250 refill cartridge is pre-filled with LGWA 2 grease, suitable for wide temperature ranges and extreme pressures. Designed for use with all TLSD single-point lubricators, it ensures reliable lubrication of electric motors, conveyors, fans, and pumps. Supplied with battery for easy installation.
Rexnord 1000 Flat MatTop Chains - 91070135
1000 Series Solid Top Chains – 1.0-inch pitch, 0.34-inch height. Ideal for conveying individual units, packaged, and cased goods with smooth operation and high durability.
Rotary Shaft Oil Seal – CR22363
The CR22363 rotary shaft oil seal is a single lip wave design manufactured from fluoro rubber (Viton). With dimensions of 2.25 in × 3.00 in × 0.375 in, it provides reliable sealing performance in demanding applications. Designed by CR Seals (SKF), it offers excellent resistance to heat, chemicals, and oil.
Self-Aligning Ball Bearing – 1220 K
High-performance self-aligning ball bearing with tapered bore, designed for smooth operation under misalignment and light to medium load conditions, offering ease of mounting and excellent high-speed performance.