Tapered Roller Bearing - 31306 J2/Q
The SKF 31306 J2/Q single row tapered roller bearing is designed to accommodate combined radial and axial loads. With a high load carrying capacity, separable components, and a 28.8° contact angle, it ensures reliable performance, easy mounting, and long service life in demanding applications.
Tapered Roller Bearing - 32310 J2/Q
The SKF 32310 J2/Q single row tapered roller bearing combines high radial and axial load capacity with low friction operation. With its separable cup and cone design, it allows easy mounting, dismounting, and maintenance, making it a durable choice for heavy-duty industrial applications.
Tapered Roller Bearing - 32317 J2
The SKF 32317 J2 single row tapered roller bearing accommodates combined radial and axial loads with high load capacity and low friction. Its separable components simplify mounting and maintenance, while ensuring long service life and reliable performance in demanding industrial applications.
Tapered Roller Bearing – 30303
The SKF 30303 single row tapered roller bearing offers high radial and axial load capacity with low friction. Its separable components simplify mounting, dismounting, and maintenance, while SKF Explorer performance ensures long service life. Suitable for demanding applications requiring rigidity, precision, and reliable performance under combined loads.
Tapered Roller Bearing – 30307 J2/Q
The SKF 30307 J2/Q is a durable single row tapered roller bearing designed to handle combined radial and axial loads. Featuring tapered raceways, a steel cage, and an open design, it ensures long service life, easy mounting, and reliable performance across demanding industrial applications.
Tapered Roller Bearing – 32309 J2/Q
The SKF 32309 J2/Q is a robust single row tapered roller bearing engineered to accommodate combined radial and axial loads. With its separable cup and cone design, it allows straightforward mounting and dismounting, making it highly reliable for demanding industrial applications requiring durability and long service life.
Tapered Roller Bearing – 33212/Q
The SKF 33212/Q is a high-performance single row tapered roller bearing engineered to handle combined radial and axial loads. Its separable cup and cone design simplifies mounting and dismounting, while its steel cage and open construction ensure durability, reliability, and efficient operation in demanding industrial applications.
Thrust Ball Bearing - 51107
SKF 51107 single-direction thrust ball bearing, 35 mm bore and 52 mm outside diameter, engineered for axial loads in one direction with a separable, maintenance-friendly design and interference-fit shaft washer.
Thrust Ball Bearing - 51206
SKF 51206 single-direction thrust ball bearing, 30 mm bore and 52 mm outside diameter, designed for axial loads in one direction with a separable, service-friendly design and interference-fit shaft washer.
Thrust Ball Bearing – 51102
The SKF 51102 thrust ball bearing is a compact axial load solution for applications requiring durability and efficiency. With a separable design, interchangeable components, and a precision-ground bore, it ensures easy installation, reliable operation, and reduced maintenance time in single-direction thrust load applications.
Thrust Ball Bearing – 51105
The SKF 51105 is a single-direction thrust ball bearing designed to handle axial loads in one direction while preventing radial loading. Its separable design allows for easier mounting, dismounting, and maintenance. Interchangeable components and ground shaft washer bores enable secure interference fits for reliable axial support.
Thrust Ball Bearing – 51110
The SKF 51110 thrust ball bearing is engineered for axial load handling in one direction, offering high performance and reliability. Its separable design allows for easier mounting, inspection, and servicing, while interchangeable components ensure reduced downtime and cost-effective maintenance in demanding axial applications.
Thrust Ball Bearing – 51144 M
The SKF 51144 M single direction thrust ball bearing accommodates axial loads in one direction while ensuring precise operation. Its separable design simplifies mounting, dismounting, and inspections, while machined brass cages provide strength and durability. Interchangeable components and ground bore shaft washers enable a secure interference fit.
Ultrasonic Leak Detector – TKSU 10
The SKF TKSU 10 ultrasonic leak detector enables quick and reliable detection of leaks in compressed air and vacuum systems. With adjustable sensitivity, intuitive OLED display, and a high-quality headset, it ensures accurate leak detection even in noisy industrial environments. Supplied complete in a durable carrying case.
V-Ring Seal – 55 VA R
The 55 VA R V-ring seal is an all-rubber axial shaft seal designed for reliable contamination exclusion in rotating shaft applications. With its VA design (straight back side face), it is the most common type of V-ring, offering easy installation, cost-effectiveness, and compatibility with VR1 designs.
V-Ring Seal – TSN 522 A
The SKF TSN 522 A V-ring seal provides a reliable barrier against contaminants for bearings and housings. Designed with a vulcanized rubber lip and corrosion-protected steel washer, it is easy to install, cost-effective, and ideal as a primary or secondary seal in harsh environments.
V-Ring Seal –TSN 532 L
The SKF TSN 532 L housing seal with a 140 mm shaft diameter is a four-lip sealing solution designed to protect bearings against contamination while retaining lubrication. Manufactured from durable thermoplastic polyester elastomer (TPE), it provides improved efficiency over double-lip seals, reduces friction, and enables higher shaft speeds.
Wide Temperature Range Bearing Grease - LGWA 2/5
SKF LGWA 2/5 is a premium-quality, lithium complex grease designed for extreme pressure (EP) applications. Ideal for industrial and automotive use, it provides excellent lubrication under high loads, extreme temperatures, and wet conditions, ensuring superior protection and durability.
Withdrawal Sleeve – AOH 3164 G
The AOH 3164 G withdrawal sleeve is a slit tapered sleeve designed for mounting bearings with a tapered bore onto cylindrical stepped shafts. Manufactured to ISO standards, it features oil injection holes for controlled mounting and dismounting, reducing manual effort while improving operator safety and reliability.
Wrapped Classical V-Belt – PHG B105
The PHG B105 wrapped classical V-belt offers reliable power transmission with low elongation, high flexibility, and strong abrasion resistance, making it ideal for demanding industrial applications.
Wrapped Classical V-Belt – PHG B44
The PHG B44 wrapped classical V-belt delivers efficient power transmission with high flexibility, low elongation, and strong abrasion resistance for long-lasting performance in industrial applications.
Wrapped Classical V-Belt – PHG C110
The PHG C110 wrapped classical V-belt ensures efficient power transmission with high flexibility, abrasion resistance, and low elongation, making it suitable for demanding industrial applications.
Wrapped Classical V-Belt – PHG C70
The PHG C70 wrapped classical V-belt delivers dependable power transmission with high flexibility and abrasion resistance. Built with polyester tensile cords for low elongation and a fibre-loaded CR rubber cushion for transverse rigidity, it ensures stable performance, energy efficiency, and long service life in demanding industrial environments.
Wrapped Wedge Belt – PHG SPC2650
The PHG SPC2650 wrapped wedge belt is engineered for reliable power transmission with excellent durability. Featuring pre-tensioned polyester cords for minimal stretch, a fibre-reinforced rubber cushion for high transverse rigidity, and a fully wrapped fabric cover for abrasion resistance, it delivers consistent performance, energy efficiency, and long service life in industrial applications.
Wrapped Wedge Belt – PHG SPC9500
The PHG SPC9500 wrapped wedge belt is a high-performance power transmission belt designed for efficiency, durability, and reliability. With pre-tensioned polyester cords for low elongation, fibre-loaded rubber for rigidity, and a fully wrapped cover for abrasion resistance, it offers reduced energy consumption and long service life in demanding industrial applications.
Wrapped Wedge Belt – PHG SPZ1112
The PHG SPZ1112 wrapped wedge belt is a durable and efficient power transmission solution. Built with polyester cords and abrasion-resistant wrapping, it provides low stretch, high rigidity, and reliable performance in demanding industrial applications.
Wrapped Wedge Belt – PHG SPZ1287
Durable wrapped wedge belt with polyester cords and abrasion-resistant cover. Designed for reliable power transmission, offering low elongation, high transverse rigidity, and resistance to oil, heat, and static.
Wrapped Wedge Belt – PHG SPZ1462
The PHG SPZ1462 wrapped wedge belt offers high transverse rigidity, low elongation, and excellent abrasion resistance, ensuring efficient and reliable power transmission.